Stainless steel. Locking. 140mm x 108mm overall. Cut-out required: 112mm x 82mm x 42mm (D). Supplied with rubber gasket & 2 keys. 0.56kg.
|
 |
Stainless steel. Locking. 120mm x 95mm overall. Cut-out required: 93mm x 65mm x 36mm (D). Supplied with rubber gasket & 2 keys. 0.40kg.
|
|
Black powder coated steel with a stainless steel handle. Comes with an internal release. Locking. 140mm x 89mm overall. Cut-out required: 110mm x 78mm x 22mm (D). Supplied with 2 keys.
|
|
Black nylon. Supplied with 2 keys. 150mm (W) x 120mm (H). Max depth: 40mm. Recess length: 120mm. Recess width: 100mm. Unit is mounted through aperture & is clamped against the panel by 2 shaped brackets. Invisible fixing. Water & corrosion resistant. Supplied with Gasket Seal. 0.56kg.
|
|
Black powder coated. Face: 106mm x 42mm. Cut-out required: 96mm x 23.5mm. Adjustable grip length from 1-44mm. Supplied with 2 keys. Operated by depressing front face. Minimal front face protrusion. Mounted via rear with a U shaped saddle. 0.27kg.
|
|
Black Powder Coated. 1-11mm grip range. Supplied with 2 keys. Cut-out required: 90mm x 35mm. Fully sealed. Adjustable grip length. Push button operation. Minimal front face protrusion. Mounted via rear with a U shaped saddle. 0.31kg.
|
|
Black Powder Coated. 11-21mm grip range. Supplied with 2 keys. Cut-out required: 90mm x 35mm. Fully sealed. Adjustable grip length. Push button operation. Minimal front face protrusion. Mounted via rear with a U shaped saddle. 0.31kg.
|
|
Black Powder Coated. 1-44mm Grip range. Supplied with 2 keys. Cut out required: 90 x 35mm. Fully sealed. Adjustable grip length. Push button operation. Minimal front face protrusion. This is not a South Co product, but is an excellent high quality re-production. 0.31kg.
|
|
Black Powder Coated. 1-48mm Grip range. Supplied with 2 keys. Cut out required: 90 x 35mm. Fully sealed. Adjustable grip length. Push button operation. Minimal front face protrusion. This is not a South Co product, but is an excellent high quality re-production. 0.31kg.
|
|
Black nylon. 28-55mm of latch bar adjustment. Supplied with 2 keys. 150 x 120mm. Max depth: 72mm. Latching point can be fixed above or below the handle. Water & corrosion resistant. Invisible fixing, 2 x M8 Locknuts. 6mm "take-up" to make seal against gasketed doors. Supplied with Gasket Seal. 0.75kg.
|
|
Price: £5.50 (Including VAT at 20%)
Zinc plated. Surface mounted. Plate: 87mm (H) x 68mm (W).87 x 68mm. 4 x 5mm fixing holes. Accepts 7.8mm square shaft. 0.27kg.
|
|
Zinc plated. Surface mounted. Choose from either left or right handed (Standing outside the vehicle, if your outside handle is on the right, then you require a right handed slam lock inside). Backplate: 85mm (H) x 50mm (W). Handle: 90mm (L). 4 x 5.8mm fixing holes. 0.29kg
|
|
Zinc plated. 95mm (W) x 61mm (H) x 16mm (D). Choose from either left or right handed (Standing outside the vehicle, if your outside handle is on the right, then you require a right handed slam lock inside).
|
|
Chrome plated. 90 degree rotation. Size: 20mm (Deep) 17.5mm (Diameter body). Offset tongue: 50mm (L) x W15mm (W). Supplied with 2 keys. 0.08kg.
|
|
Chrome plated. 180 degree rotation. Size: 20mm (Deep) 17.5mm (Diameter body). Offset tongue: 50mm (L) x W15mm (W). Supplied with 2 keys. 0.08kg.
|
|
Zinc plated. 125mm (L) x 70mm (W). 0.12kg.
|
|
Zinc plated. 83mm (L) x 70mm (W). 0.07kg.
|
|
Zinc plated case & pressed steel tongue. Universal. 85mm x 23mm x 9.5mm. 0.06kg.
|
|
Zinc plated case & nylon tongue. Universal. 85mm x 23mm x 8mm. Pictured top middle.
|
|
Zinc plated case & malleable steel tongue. Universal. 126mm x 27mm x 13.5mm. Pictured bottom left.
|
|
Black plastic. Supplied with Catch Plate. Overall: 83 x 22mm. Held positively in open or closed position by concealed spring. 2 x 6.5mm fixing holes. 0.06kg.
|
|
Polished Chrome on die cast body. 3 hole fixings. 28mm overall. 13mm hole. Opens 110 degrees. 2 x 3.4mm countersunk fixing holes. 0.02kg.
|
|
Black plastic. Sprung. 3 hole fixings. 40mm x 30mm. 16mm hole. Opens 150 degrees. 3 x 3.6mm countersunk fixing holes. 0.01kg.
|
|
Comes with 2 x rod guides & 1 x keeper. Rod dia: 10mm. Length extended: 2230mm. Length retracted: 2264mm. Tongue length: 45mm.
|
|
Spring loaded. Pressed steel mechanism with a forged steel tongue. Zinc plated finished. Supplied with self colour weld on Catch Plate. Backplate: 150mm x 80mm. 4 x 8mm fixing holes. 1.01kg.
|
|
