Galvanised, mild steel. 66mm x 14mm x 3.5m. 25mm (dia) holes. Used to hold partitions in place, top & bottom. 2.40kg.
|
 |
Zinc plated, mild steel. 82mm x 15mm x 3.5m. 25mm holes. Used to hold partitions in place, top & bottom. 4.10kg.
|
|
Stainless steel. 80mm x 14mm x 3.5m. 25mm holes. Used to hold partitions in place, top & bottom.
|
|
White. Compliments the heavy duty partition track (1806 & 1806/S) above.
|
|
Ideal for making partitions, etc. 44mm (diameter) x 2.6mm (wall). Adjusts from 2050mm to 2550mm. 25mm ends, fits to into the partition track. Sprung one end. Mild steel, bright zinc plated. 7.75kg. Can also be made any length & or with red nylon straps on one or both ends (at an extra cost).
|
|
Ideal for making partitions, etc. 42mm (diameter) x 3mm (wall). Adjusts from 2270mm to 2650mm. 25mm ends, fits to into the partition track. Sprung one end. Mild steel, bright zinc plated. 7.75kg. Can also be made any length & or with red nylon straps on one or both ends (at an extra cost).
|
|
Price: £129.75 (Including VAT at 20%)
Ideal for making partitions. 44.4mm (diameter). 25mm ends, fits to into the partition track. Mild steel, bright zinc plated. Made to the length you require, has a locking slot & a red pull strap one end. Cannot be ordered online because it is hand made to your requirements.
|
|
Price: £145.50 (Including VAT at 20%)
Ideal for making partitions. 44.4mm (diameter). 25mm ends, fits to into the partition track. Mild steel, bright zinc plated. Made to the length you require, has a locking slot & a red pull strap both ends. Cannot be ordered online because it is hand made to your requirements.
|
|
Zinc Plated. Bolt: 10mm (Diameter). Bracket: 72mm x 40mm. Fixing holes: 4 x 5.5mm. 0.20kg.
|
|
Zinc Plated. Bolt: 12mm (Diameter). Bracket: 88mm x 40mm. Fixing holes: 4 x 5.5mm. 0.36kg.
|
|
Zinc Plated. Bolt: 12mm (Diameter). Bracket: 124mm x 40mm. Fixing holes: 4 x 6.5mm. 0.51kg.
|
|
Zinc Plated. 12mm bar. 160mm x 40mm overall. Peg retaining.
|
|
Plasticised PVC. Used on the spring loaded bolt II above. Choose from black or red. 79mm x 44mm x 37mm.
|
|
Zinc Plated. Bolt: 16mm (Diameter). Bracket: 134mm x 50mm. Fixing holes: 4 x 6.5mm. 0.93kg.
|
|
Zinc plated, mild steel. Pin: 140mm x 30mm x 10mm. With ring & 189mm of chain.
|
|
Zinc plated. Pin: 98mm x 10mm. With plastic coated wire (190mm). 0.09kg.
|
|
Zinc plated with a brass tip. Pin: 100mm x 12mm (not including the brass tip). Complete with spring (40mm), ring & chain. The spring is easily removed if not required. 0.23kg.
|
|
Zinc plated with a brass tip. Pin: 73mm x 10mm (not including the brass tip). Complete with spring (36mm), ring & chain. The spring is easily removed if not required. 0.12kg.
|
|
Zinc plated with a brass tip. Pin: 114mm x 16mm (not including the brass tip). Complete with spring (59mm), ring & chain. The spring is easily removed if not required. 0.35kg.
|
|
Aluminium. 3m x 34mm x 8.5mm. Holes: 20mm diametre. For horizontal wall mounting or floor fixing. Ideal for securing items whilst travelling. Works in combination with the stud fittings below. 2.50kg.
|
|
Works in combination with the captive restraint track above. Ring diametre: 39mm. Overall height: 61mm. 0.08kg.
|
|
Smooth black commercial quality rubber with a woven cotton reinforcement. Priced per metre. 3mm (Thick) x 1.4m (W). Ideal for horsebox partition skirts, etc. Due to the weight, please call for a postage quote.
|
|
Smooth black commercial quality rubber with a woven cotton reinforcement. Priced per metre. 5mm (Thick) x 1.4m (W). Ideal for horsebox partition skirts, etc. Due to the weight, please call for a postage quote.
|
|
Very strong clear PVC for use on horsebox partitions. Priced per metre (call or email us for half metre measurements). 3mm (Thick) x 1.2m (W), a discount is available for a full 10 metre roll.
|
|
Very strong clear PVC for use on horsebox partitions. Priced per metre (call or email us for half metre measurements). 4mm (Thick) x 1.2m (W), a discount is available for a full 10 metre roll.
|
|
